Patiala, Punjab

+91 70097 59511
Lucky Trading Company logo

Lucky Trading Company

Wholesale Ply • Block Board • MDF • Flush Doors • Mica

Buying Guide

Termite and Borer Resistant Plywood: What the Treatment Does and Does Not Do

By Lucky Trading Company · Updated November 2026

"Borer and termite proof" appears on plenty of plywood labels. It sounds like a guarantee. In practice it describes a treatment, and treatments have limits. This guide explains what is usually meant, what the treatment cannot do, and the site practices that make a bigger difference to how long your furniture lasts.

What the Treatment Usually Is

Manufacturers typically add a preservative to the glue or treat the veneers so that the wood is less attractive to wood-boring insects. The aim is to slow down or discourage attack on the board itself. The exact chemical, the dose and how evenly it is applied differ between brands, which is why two boards with the same claim can perform differently.

What It Does Not Do

Site Practices That Matter More Than the Label

  1. Treat the building, not just the board. Ask your builder about anti-termite treatment of the floor, walls and plinth during construction.
  2. Keep wood off the ground. Furniture with a gap beneath it, or placed on a raised plinth, is harder for termites to reach.
  3. Control moisture. Damp walls, leaking pipes and humid corners attract termites. Fix the leak first.
  4. Seal the edges. Edge banding, laminate and paint close up the cut faces that are most exposed.
  5. Leave a small air gap behind wardrobes on outside walls so the back panel is not pressed against a damp surface.
  6. Inspect now and then. Look for mud tubes, fine sawdust or small round exit holes, and act early.

How to Ask the Right Questions When Buying

A dealer who answers these specifically is usually more reliable than one who simply repeats the label.

Choosing for Your Project

For bedroom and living room furniture in a dry house, a well-made MR grade board with a good site plan is usually enough. For kitchens, bathrooms and outside walls, choose BWR or BWP and put more effort into sealing and moisture control. Our guide to checking plywood quality covers the physical checks to do before you accept any board.

If you want to ask about a particular brand's treatment, message us on WhatsApp and we will share what we know.

Frequently Asked Questions

Is termite proof plywood completely safe from termites?

No. Treatment makes the board less attractive to insects, but cut edges, screw holes and active termite colonies in walls can still cause damage. Treat the building and control moisture as well.

Is waterproof plywood also termite proof?

Not automatically. Waterproofing and insect resistance are separate properties. Ask the brand which treatment is used.

How can I reduce termite risk in my furniture?

Treat the building during construction, keep furniture off the floor, fix damp problems, seal edges and leave a small air gap behind wardrobes on outer walls.

Ready to buy?

Message Lucky Trading Company on WhatsApp for wholesale rates and honest advice on what to buy.

Ask on WhatsApp

More Articles